proFIL™ 1313 is a compact and high performance antenna splitter from 80 MHz up to 2.5 GHz WiFi frequency. It is designed to be used with proD4™ antenna.
proFIL 1320 an active Navtex antenna (0.1MHz-30MHz) power feeder. It is intended to be used when MF/HF DSC receiver or Navtex receiver is connected to an active receive antenna and receiver itself cannot source power to antenna.
proFIL 1321 splits existing MF/HF radio’s separate DSC receiving antenna (typically long wire whip) with Navtex or WeatherFax receiver. It can be used to split any 0.1-100MHz antenna with two receivers.
proFIL 1322 splits an active Navtex antenna (0.1MHz-30MHz) with Navtex and WeatherFax receivers or MF/HF DSC receivers. It can be used to split any active Navtex antenna that tolerates +10VDC voltage from the receiver.
proFIL 1323 proFIL 1323 splits existing FM receiver’s antenna (like FAME1) with Navtex or WeatherFax receiver and adds amplifier for Navtex frequencies. It can be used to split any FM/VHF range antenna that has satisfactory response to lower (0.1-30MHz) frequencies.
proFIL 1324 is intended to be used with passive receive only antennas for FM radios and DAB receivers in poor reception conditions.
proFIL 1331 splits existing FM radio’s receiving antenna (like FAME1) to two FM receivers with added protection towards VHF interference and ground leaks.
proFIL1350 is a power splitter that combines two tactical VHF transceivers to the same antenna. Isolation between ports protects transceivers from simultaneous transmission damages.
proFIL 4202 splits existing VHF DSC antenna with AIS receiver. It can be used to split any 100-300MHz antenna with two receivers.
Our unbeatable communication product and service portfolio ensures high quality and interference free communications..
Copyright © Promarine Oy 2016 | Vuoritie 6, FIN-21600 Parainen | Tel. +358 2 4542340 | E-mail address: firstname.lastname@example.org